
Bilston, West Midlands
Terraced Housing Damp Surveys in Bilston
Damp specialist in Bilston — damp & timber reports and independent damp surveys in Bilston and surrounding areas. CSRT accredited and LM3DMC qualified with 18 years' experience.
Independent Damp Surveyor
Damp, timber and thermal surveys in Bilston
Bilston's dense Victorian and early-20th-century terraces were built without damp-proof courses and with solid nine-inch walls. Most of what we find is a combination of genuine ground moisture and severe condensation, and separating the two matters financially.
We survey around the town centre, Bradley, Stowlawn and the estates toward Ettingshall. Party wall defects spread problems between neighbouring houses, rear extensions built over old yards trap moisture, and mining legacy ground in this part of the Black Country keeps water levels high.

Common issues
Damp problems we see in Bilston
Every property is different, but these are the damp, moisture and timber issues we most often diagnose in Bilston and nearby West Midlands homes.
No original damp-proof course in Victorian terraces
Damp spreading through shared party walls
Rear extensions built over former yards and drains
Black mould in bedrooms and stairwells
Rot in ground-floor joists and skirtings
Services
Damp surveys available in Bilston


Rising damp diagnosis and moisture profiling

Landlord damp and mould reports

Damp and timber reports for mortgage lenders

Ventilation and PIV advice
Why book an independent survey in Bilston?
We are not affiliated with any damp-proofing or remedial contractor. Our only job is to find the cause, document the evidence, and tell you what to do next — whether that's a simple ventilation change or a specialist repair.
- CSRT accredited surveyors
- LM3DMC qualified
- 18 years of specialist experience
- Reports accepted by mortgage lenders
- No vested interest in remedial work

The survey
What happens on a Bilston damp survey
A typical inspection of a Bilston home takes 1–2 hours on site, with your written damp and timber report normally issued within 2–3 working days.
1. Site inspection
We inspect the affected areas and the wider building fabric of your Bilston property, inside and out.
2. Readings & imaging
Calibrated moisture meter readings and thermal imaging trace hidden moisture paths and cold spots.
3. Diagnosis
We identify the actual cause — rising damp, penetrating damp, condensation, a leak or timber decay.
4. Written report
You receive a photographic report with readings, findings and prioritised, costed next steps.
Not sure what you're looking at yet? Read our signs of damp guide, check typical damp survey costs, or see how we handle heat loss surveys and ventilation systems.
FAQs
Damp survey questions from Bilston homeowners
How much does a damp survey cost in Bilston?
An independent damp and timber report in Bilston typically starts from around £250 for a standard house, with larger or more complex properties priced individually. We give you a fixed quote before we attend, and there is no charge for remedial work because we don't carry any out. See our damp survey cost guide for a full breakdown.
How quickly can you attend a property in Bilston?
We usually offer an appointment in Bilston within a few working days, and we can often prioritise urgent mortgage or purchase deadlines. Send us the postcode and your deadline and we'll confirm availability within one working day.
Will a mortgage lender accept your damp report for a Bilston property?
Yes. Our damp and timber reports are prepared by CSRT accredited, LM3DMC qualified surveyors and are written in the format lenders and solicitors expect, with moisture readings, photographic evidence, a diagnosis and costed recommendations.
Are you independent from damp-proofing contractors in Bilston?
We are completely independent. We do not sell, install or subcontract remedial damp-proofing work, so there is no incentive to over-specify treatment. You get a diagnosis based only on what the evidence shows.
Which areas around Bilston do you cover?
As well as Bilston itself we regularly survey properties in Wolverhampton, Wednesbury, Willenhall, Tipton, Sedgley, Darlaston and the wider West Midlands area. We also work throughout the UK for portfolio, social housing and lender instructions.
What happens during a damp survey in Bilston?
We inspect the affected areas and the wider building fabric, take calibrated moisture meter readings, use thermal imaging to trace cold spots and hidden moisture paths, check ventilation and inspect accessible timbers. You receive a written report with photographs, readings, the cause of the problem and prioritised next steps.
Guides
Useful reading before your Bilston survey
The guides most relevant to the damp problems we see in Bilston.
Signs of damp in Bilston homes
Tide marks, black mould, flaking plaster and musty smells — what each sign means before you book a Bilston survey.
Read guideDamp & timber reports for Bilston mortgage lenders
What lenders and solicitors expect from a damp and timber report on a Bilston purchase.
Read guideHow much a damp survey costs in Bilston
Typical fees for an independent damp and timber report on a Bilston property, and what's included.
Read guideVentilation and PIV systems for Bilston properties
Positive input ventilation and ducted systems where condensation keeps returning in Bilston homes.
Read guideCoverage
Damp surveys near Bilston
We also cover these towns and areas close to Bilston. If your area isn't listed, we can still travel to you — just ask.
See every area we cover on our damp survey locations page, or read our damp & timber survey guide.
Book a damp survey in Bilston
Call, WhatsApp or email us to arrange a damp and timber survey, mortgage report or thermal imaging inspection in Bilston.
Call
07943 925 518
07943 925 518
dampsolutions1990@gmail.com
Coverage
Bilston and surrounding areas
Get a quote
Tell us the postcode and a brief description of the problem. We'll respond within one working day with availability and a fixed quote.
Request a damp survey quote